Category Theory Basics, Part I


Published on September 18, 2016, last updated June 1, 2017

When you do Haskell on daily basis (simply put, earn a living writing Haskell code), sooner or later you start to regret you don’t have background in advanced math (unless you have such background, of course, and in that case the post will be probably uninteresting for you). I think it’s a situation in which people who use Haskell as engineers (not researchers) find themselves at some point.

The most important and relevant math area for a Haskeller is probably category theory, which does look scary at first and Wikipedia articles/videos of lectures seem to be only partially understandable, always leaving you with a bunch of new notions unexplained. There is no problem to understand what Monad means and how it’s useful in functional programming (although the abstraction may take some time to sink in), but the feeling of missing “bigger picture”, full of wonderful ideas may not leave you once you started to use abstractions from category theory.

So, having intuitive understanding of what the word “injective” means and more-or-less proper understanding of what some things like “isomorphism” mean, I decided to read a book that describes all the concepts in order and using simple language.

The book I found is called “Conceptual Mathematics—A First Introduction to Categories” by F. William Lawvere and Stephen H. Schanuel. The book does not assume math background of any sort and anyone can understand concepts described in it. You can give it a try, but the books in not short—376 pages, and it does not even get you to monads (probably will need something else after it if I decide that I haven’t got enough). So this post is the first in a series of blog posts1 that I want to write as a sort of overgrown cheat sheets that highlight important ideas from category theory in a concise form.

I hope that working on the blog posts will help me better organize the ideas from the book in my head, and may be useful for others who may not necessarily have the time to read the book.

Note: here is a somewhat similar post here, but it tries to make the concepts more programmer-friendly by providing examples from “programming world” using pipes, compilers, and circuits. I have no such intention, and in fact I tested this descriptions on people who are neither programmers nor mathematicians, and it worked!

What is a category?

As everything in math, we need some starting points and definitions to build on. The main definition is of course category itself. Category is defined by objects and maps (synonyms: arrows, morphisms, functions, transformations). There are also a few laws that should hold for the objects and maps in order to form a category, but we will get to them a bit later.

Objects can be pretty much everything. The simplest and most intuitive object is probably finite set (just a collection of things), and it will be discussed in the next section.

Maps have domain (an object), codomain (an object again), and a rule assigning to each element2 \(a\) in the domain, an element \(b\) in the codomain. This \(b\) is denoted by \(f \circ a\) (or sometimes \(f(a)\)), read “\(f\) of \(a\)”. Simply put, domain contains all possible arguments of the mapping function and codomain contains output values.

An important thing here is that if we say that object \(A\) is domain and object \(B\) is codomain of some map, then the map should be defined for every value \(a\) in \(A\) (i.e. it should “use” all input values), but not necessarily it should map to all values in \(B\). This may seem obvious, but I want to put it here explicitly, because I found this “rule” useful for understanding some conclusions in the book many times.

At this point it should be clear that category theory is a very abstract thing. If we study abstract transformations of abstract objects, then certainly we study something that takes place in every area of science and human knowledge, because human knowledge in general has to do with objects, their relations, and mappings.

There are a couple more things that a category should have, and I’ll describe them in a moment, but first it’s good to introduce category of finite sets and some notation that will be helpful for visualization.

Category of finite sets, internal and external diagrams

In the category of finite sets objects are finite sets and maps are rules how to go from a value in one set to a value in another set. Due to how our brain works, it’s much easier to reason about collections of values and their mappings, than about abstract categories. We will be using the category of finite sets to explain most concepts here, and to visualize them, we will draw pictures of the sets and maps between them.

The set \(\{John, Mary, Sam\}\) may be drawn just as:

Internal diagram of a set

where a dot represents each element. We can also leave off the labels if they are irrelevant to discussion. Such picture, labelled or not, is called internal diagram of the set.

We can picture a map as collection of arrows that go from elements of one set to element of another set:

Internal diagram of a map

There are also external diagrams for the cases when we do not care about concrete elements of objects:

\[A \xrightarrow{f} B\]

Endomaps and identity maps

A map in which the domain and codomain are the same object is called an endomap (“endo”, a prefix from Greek ἔνδον endon meaning “within, inner, absorbing, or containing” Wikipedia says). For endomaps we have a special form of internal diagram:

Internal diagram of an endomap

It turns out that in every category, for each object, we have a map that maps elements of an object \(A\) to themselves. This map is called identity map and is denoted as \(1_\text{A}\). Here is an example of internal diagram of an identity map (taken from the book, like the pictures above):

Internal diagram of an identity map

The \(1_\text{A}\) notation will make more sense once we learn about composition of maps in the next section.

Definition: An endomap \(e\) is called idempotent if \(e \circ e = e\).


The final, fourth (after objects, maps, and identity maps) thing that a category should have (or support) is the ability to compose maps. That’s where all the fun begins.

Composition of two maps \(f\) and \(g\), written as \(f \circ g\) (read as “\(f\) after \(g\)”) is another map with the same domain as domain of \(g\) and the same codomain as codomain of \(f\). To find output value for an input \(a\) we first “apply” (or follow arrows) of map \(g\) and then take the result, feed it as input to map \(f\) and get the final result. Obviously, to feed result of \(g\) as input to \(f\), domain of \(f\) should be the same of codomain of \(g\).

In a more familiar notation:

\[f \circ g = f(g(a))\]

That equation also explains why composition “works” from right to left (with respect to the \(f \circ g\) notation), it’s from the desire to preserve order of functions when we go from a more explicit notation on the right hand side to notation on the left hand side.

Once we have the \(f \circ g\) map we can forget how we got it and treat it just as an ordinary map, which it is, of course:

\[A \xrightarrow{g} B \xrightarrow{f} C = A \xrightarrow{f \circ g} C\]

Not only the composition of maps should be possible, but it should satisfy these laws so objects and maps “fit together nicely”:

  1. The identity laws:

    \[A \xrightarrow{1_\text{A}} A \xrightarrow{g} B \Rightarrow A \xrightarrow{g \circ 1_\text{A} = g} B\]


    \[A \xrightarrow{f} B \xrightarrow{1_\text{B}} B \Rightarrow A \xrightarrow{1_\text{B} \circ f = f} B\]

  2. The associative law:

    \[A \xrightarrow{f} B \xrightarrow{g} C \xrightarrow{h} D \Rightarrow\]\[A \xrightarrow{h \circ (g \circ f) = (h \circ g) \circ f} D\]

These rules make composition of maps work similarly to multiplication of numbers. The identity laws ensure that identity maps work indeed like number 1, so we can easily remove (or add) them without changing anything. We will use that trick a lot. The associative law allows us to move parenthesis. The analogy between multiplication and composition does not extend too far though, because we cannot generally swap order of maps in composition, since their inputs and outputs are sort of “typed” by domain and codomain objects.


One of simplest and ubiquitous things in category theory is isomorphism. A map \(A \xrightarrow{f} B\) is called an isomorphism, or invertable map, if there is a map \(B \xrightarrow{g} A\) for which \(g \circ f = 1_\text{A}\) and \(f \circ g = 1_\text{B}\). Two objects \(A\) and \(B\) are said to be isomorphic if there is at least one isomorphism \(A \xrightarrow{f} B\).

What does \(g \circ f = 1_\text{A}\) mean? It means that if we apply \(f\) to any \(a\) from \(A\), feed the result into \(g\), then we get the same value \(a\) we started with. Pretty easy, right?

Isomorphisms are cool. They allow to move freely from one representation of object to another. For example, Cartesian system of coordinates is based on the idea that a pair of numbers is isomorphic to a point on plane, then you work from that.

There are a few properties of isomophisms that come directly from the associative and identity laws of maps:

  • Reflexive: \(A\) is isomorphic to \(A\) (follows from the existence of identity maps).

  • Symmetric: if \(A\) is isomorphic to \(B\), then \(B\) is isomorphic to \(A\). This simply follows from the definition of isomorphism.

  • Transitive if \(A\) is isomorphic to \(B\), and \(B\) is isomorphic to \(C\), then \(A\) is isomorphic to \(C\) (see the proof below).

Notation: if \(A \xrightarrow{f} B\) has an inverse, then the (one and only) inverse for \(f\) is denoted by the symbol \(f^{-1}\) (read “\(f\)-inverse”, or “the inverse of \(f\)”). Yes, again we have the analogies with numbers!

\[f^{-1} \circ f = 1_\text{A}, f \circ f^{-1} = 1_\text{B}\]

Let’s prove the transitive property now as an exercise. We are given that:

\[A \xrightarrow{f} B, B \xrightarrow{f^{-1}} A,\]\[f^{-1} \circ f = 1_\text{A}, f \circ f^{-1} = 1_\text{B}\]\[B \xrightarrow{k} C, C \xrightarrow{k^{-1}} B,\]\[k^{-1} \circ k = 1_\text{B}, k \circ k^{-1} = 1_\text{C}\]

In order to show that \(A\) is isomorphic to \(C\), we need to show that the \(k \circ f\) map (the only map that takes us from \(A\) to \(C\)) has an inverse \(g\). Replacing \(f\) with \(k \circ f\) in the definition of isomorphism we have:

\[g \circ (k \circ f) = 1_\text{A}\]\[(k \circ f) \circ g = 1_\text{C}\]

To go back from \(C\) to \(A\) we have the only way: \(C \xrightarrow{f^{-1} \circ k^{-1}} A\), let’s show that it actually an inverse for \(k \circ f\):

\[(f^{-1} \circ k^{-1}) \circ (k \circ f) = 1_\text{A}\]\[f^{-1} \circ (k^{-1} \circ k) \circ f = 1_\text{A}\]\[f^{-1} \circ 1_\text{B} \circ f = 1_\text{A}\]\[f^{-1} \circ f = 1_\text{A}\]\[1_\text{A} = 1_\text{A}\]

This makes use of identity laws and associative law we discussed previously. The second equation can be proved the same way.

If \(f\) has an inverse, then \(f\) satisfies two cancellation laws:

  • If \(f \circ h = f \circ k\), then \(h = k\).
  • If \(h \circ f = k \circ f\), then \(h = k\).

Let prove the first one. We assume that \(f\) has an inverse and that \(f \circ h = f \circ k\) and we try to show that \(h = k\). Since \(f \circ h\) and \(f \circ k\) are the same map, \(f^{-1} \circ (f \circ h)\) and \(f^{-1} \circ (f \circ k)\) are also the same. But now we can use the rules we already know:

\[f^{-1} \circ (f \circ h) = f^{-1} \circ (f \circ k)\]\[(f^{-1} \circ f) \circ h = (f^{-1} \circ f) \circ k\]\[1_\text{A} \circ h = 1_\text{A} \circ k\]\[h = k\]

Sections and retractions

Let’s give names to some special relations of maps that will be very useful to us later. If \(A \xrightarrow{f} B\), then

  • a retraction for \(f\) is a map \(B \xrightarrow{r} A\) for which \(r \circ f = 1_\text{A}\);

  • a section for \(f\) is a map \(B \xrightarrow{s} A\) for which \(f \circ s = 1_\text{B}\).

The first thing to note is that we cannot say that some map \(r\) is a retraction by itself, it only makes sense to say that \(r\) is retraction for another map \(f\). The same for sections. So if we have \(r \circ s = 1_\text{A}\), then \(r\) is retraction for \(s\) and \(s\) is section for \(r\).

Useful mnemonics for retraction is that it retracts values “back from where they come”. While the name “section” is a little trickier.

We can think of a section \(B \xrightarrow{s} A\) as a way to select a “B-section” in a (possibly) bigger object \(A\):

Internal diagram with a section

This picture also shows the important idea that in order for \(f\) to have a section, its domain \(A\) should be at least as big as codomain \(B\), not smaller. (Make sure that this makes sense to you now, imagine \(A\) having only two dots in it and try to travel from dots in \(B\) to values in \(A\) and back arriving to the same dots—that’s impossible.)

On the other hand, for \(f\) to have a retraction, its codomain \(B\) should be at least as big as its domain \(A\) (the logic is exactly the same, so I won’t repeat it here).

Monomorphism and epimorphism

Suppose a map \(A \xrightarrow{f} B\) has a retraction. Then for any set \(T\) and for any pair of maps \(T \xrightarrow{x_\text{1}} A\), \(T \xrightarrow{x_\text{2}} A\) from \(T\) to \(A\).

\[\text{if } f \circ x_\text{1} = f \circ x_\text{2} \text{ then } x_\text{1} = x_\text{2}\]

Proof: Looking at the definition, we see that the assumption means that we have a map \(r\) for which \(r \circ f = 1_\text{A}\). Using the assumption that \(x_\text{1}\) and \(x_\text{2}\) are such that \(f\) composes with them to get the same \(T \to B\), we can compose further with \(r\) as follows:

Injective map

\[x_\text{1} = 1_\text{A} \circ x_\text{1} = (r \circ f) \circ x_\text{1}\]\[= r \circ (f \circ x_\text{1}) = r \circ (f \circ x_\text{2})\]\[= (r \circ f) \circ x_\text{2} = 1_\text{A} \circ x_\text{2} = x_\text{2}\]

Definitions: A map \(f\) satisfying the conclusion “for any pair of maps \(T \xrightarrow{x_\text{1}} A\) and \(T \xrightarrow{x_\text{2}} A\), if \(f \circ x_\text{1} = f \circ x_\text{2}\) then \(x_\text{1} = x_\text{2}\)” is said to be injective for maps from \(T\).

If \(f\) is injective for maps from \(T\) for every \(T\), one says that \(f\) is injective, or is a monomorphism.

What does all this stuff mean anyway? Simply put, if you can “cancel” \(f\) by having a way (retraction) to go back, then when you apply \(f\) after other maps and get the same results, then those maps are the same. I.e. you can cancel application of \(f\) and tell if we were given the same maps or different ones. After application of \(f\) we can still reason of what happened before the application. That’s the cancellation.

For example, when GHC gets into a situation when it has only result of type-level function application, but it needs to figure out what argument of that function was, it complains that the type-level function may be not injective. Fair enough! (In GHC 8.0, there is a way to annotate type-level functions telling that they are injective.)

Remember that if \(f\) has a retraction, then \(f\) satisfies the cancelation law:

  • If \(f \circ h = f \circ k\), then \(h = k\).

And if \(f\) has a section, then \(f\) satisfies another cancelation law:

  • If \(h \circ f = k \circ f\), then \(h = k\).

(We talked about \(f\) having an inverse, but if \(f\) as an inverse, then it happens to be both retraction and section for \(f\), we will prove this later in the post.)

Suppose a map \(A \xrightarrow{f} B\) has a section. Then for any set \(T\) and any pair of maps \(B \xrightarrow{t_\text{1}} T\), \(B \xrightarrow{t_\text{2}} T\) from \(B\) to \(T\).

\[\text{if } t_\text{1} \circ f = t_\text{2} \circ f \text{ then } t_\text{1} = t_\text{2}\]

Definition: A map \(f\) with this cancellation property (if \(t_\text{1} \circ f = t_\text{2} \circ f\) then \(t_\text{1}=t_\text{2}\)) for every \(T\) is called epimorphism.

What happens here? Now we apply \(f\) before some maps \(t_\text{1}\) and \(t_\text{2}\), and we conclude that if the results we get are the same, then those \(t_\text{1}\) and \(t_\text{2}\) are also the same. Intuitively, given a value \(b\) from \(B\) that goes as an input to \(t_\text{1}\) and \(t_\text{2}\), we should be able to “cancel” previous application of \(f\) and tell which value \(a\) from \(A\) was given to \(f\) so that it produced that particular \(b\). The condition that \(f\) has a section is exactly the condition that there is a way to go from values from \(B\) (result of \(f\)) “back” to values from \(A\) (inputs for \(f\)). Note however that \(A\) may be “bigger” than \(B\) and the condition does not forbid \(A\) from having several \(a\) going to the same \(b\).

Composing sections and retractions

Now we are going to consider two really simple propositions.

Proposition: If \(A \xrightarrow{f} B\) has a retraction and if \(B \xrightarrow{g} C\) has a retraction, then \(A \xrightarrow{g \circ f} C\) has a retraction.

Proof: Let \(r_\text{1} \circ f = 1_\text{A}\) and \(r_\text{2} \circ g = 1_\text{B}\). Then a good guess for a retraction of the composite would be the composite of the retractions in the opposite order (which is anyway the only order in which they can be composed).

Composition of retractions

Using the familiar tricks:

\[r \circ (g \circ f) = (r_\text{1} \circ r_\text{2}) \circ (g \circ f)\]\[= r_\text{1} \circ (r_\text{2} \circ g) \circ f = r_\text{1} \circ 1_\text{B} \circ f\]\[= r_\text{1} \circ f = 1_\text{A}\]

This proves that \(r\) is a retraction for \(g \circ f\).

Proving that the composite of two maps each having sections, has itself a section is left as an exercise for the reader.

Theorem of uniqueness of inverses

Theorem (uniqueness of inverses): If \(f\) has both a retraction \(r\) and a section \(s\), then \(r = s\).

Proof: From the definition we have, if \(A \xrightarrow{f} B\), both of the equations

\[r \circ f = 1_\text{A} \text{ and } f \circ s = 1_\text{B}\]

Then by identity and associative law

\[r = r \circ 1_\text{B} = r \circ (f \circ s)\]\[= (r \circ f) \circ s = 1_\text{A} \circ s = s\]

Another definition of isomorphism, automorphism

Using the notions of “section” and “retraction” we can rephrase the definition of “isomorphism”.

Definitions: A map \(f\) is called an isomorphism if there exists another map \(f^{-1}\) which is both a retraction and a section for \(f\):

\[A \xrightarrow{f} B, f \circ f^{-1} = 1_\text{B}\]\[A \xleftarrow{f^{-1}} B, f^{-1} \circ f = 1_\text{A}\]

Such a map \(f^{-1}\) is called the inverse map for \(f\); since both of the two equations are required, the theorem of uniqueness of inverses shows that there is only one inverse.

Definition: A map that is an endomap and at the same time an isomorphism is usually called by the one word automorphism.

  1. Sorry, I must admit I’ve abandoned the series as of 1st of July, 2017.
  2. OK, as one my friend noticed, from now on we rather discuss category of sets, not category theory (which is more abstract, there are no elemenets in objects for example). Too late for me to rewrite everything, though!